DL/T 5141-2001 水电站压力钢管设计规范
作者:标准资料网 时间:2024-05-17 20:53:19 浏览:8748
来源:标准资料网
基本信息
标准名称: | 水电站压力钢管设计规范 |
英文名称: | Specifications for design of steel penstocks of hydroelectric stations |
中标分类: |
工程建设 >>
水利、水电工程 >>
水电工程 |
ICS分类: |
能源和热传导工程 >>
水力工程
|
替代情况: | SD 144-1985 |
发布部门: | 中华人民共和国国家经济贸易委员会 |
发布日期: | 2001-12-26 |
实施日期: | 2002-05-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 国家电力公司水电水利规划设计总院 |
归口单位: | 国家电力公司水电水利规划设计总院 |
起草单位: | 国家电力公司西北勘测设计研究院 |
起草人: | 黄伟、博少君等 |
出版社: | 中国电力出版社 |
出版日期: | 2002-05-01 |
页数: | 152页 |
适用范围
本标准适用于水电站的1、2、3级发电引水钢管的设计。水电站的4、5级发电引水钢管设计可结合具体情况参照使用。水电站发电引水钢管级别划分应按SDJ12—1978《水利水电枢纽工程等级划分及设计标准》(山区、丘陵区部分)及其补充规定执行。凡压力钢管基本参数(管径D、作用水头H或HD)超出本标准在布置、材料、结构分析等有关条文的规定或限度者,应作专门研究。若钢管兼有其他用水要求(灌溉、供水等),其岔管及支管的设计亦应符合本标准的要求。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 工程建设 水利 水电工程 水电工程 能源和热传导工程 水力工程
基本信息
标准名称: | 简式长方形基础板 |
中标分类: |
机械 >>
工艺装备 >>
组合卡具 |
替代情况: | HB 1464-75 |
发布日期: | 1987-04-08 |
实施日期: | 1987-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 4页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 工艺装备 组合卡具
Product Code:SAE AMSQQA250/22
Title:Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant (NONCURRENT Mar 2007)
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope: This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodix to the core and of approximately equal thickness, bonded to both surfaces.
Rationale: This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodix to the core and of approximately equal thickness, bonded to both surfaces.